Inspection Arsenal, CMM Fixture System (30″ Dock with Starter Clamp Kit), SYS20_DK30TR03

Inspection Arsenal, CMM Fixture System (30″ Dock with Starter Clamp Kit), SYS20_DK30TR03

Inspection Arsenal, CMM Fixture System (30″ Dock with WORKS Clamp Kit), SYS20_DK30TR01

Inspection Arsenal, CMM Fixture System (30″ Dock with WORKS Clamp Kit), SYS20_DK30TR01

Inspection Arsenal, CMM Fixture System (30″ with Complete Clamp Kit), SYS20_DK30TR02

was $3,528.00 Special Price $3,351.60

Bundle includes:

  • (1) LNL-Dock-30, 30″ docking rail
  • (1) LNL-PLT-0606, 6 x 6″ Loc-N-Load ™ plate
  • (1) LNL-PLT-0612, 6 x 12″ Loc-N-Load ™ plate
  • (1) LNL-PLT-1212, 12 x 12″ Loc-N-Load ™ plate
  • (1) LNL-ANGL-0306, 6″ Angle Plate / Stop
  • (1) LNL-QUAL-PLT,  6 x 4″ Indicator Ball Plate
  • PLUS – (1) TR-KIT-02 Inspection Arsenal® 70 pc  Complete work holding kit containing non-marring hold downs, v-blocks, stops and stand-offs.

Affordable enough to add to each CMM.

SKU
SYS20_DK30TR02

Description

6-Pc. CMM Fixture Plate System  (18″ Rail) PLUS Complete Clamp Kit (82 pcs)

The largest of rails, the 30″ Docking Rail fits most mid-sized CMMs. For larger and gantry-style CMMs add more than one rail and a variety of fixture plates.  All Loc-N-Load™ fixture plates, rails, and clamps are designed to be built like puzzle pieces in a magnetically interlocking style. The Complete Work Holding Kit provides everything you need to inspect virtually any part. Add one kit per CMM to create redundancy in your Quality Department. They can be purchased as needed and shipped same day!

Bundle includes: (1) Loc-N-Load™ 30” Docking Rail; (1) 6×6” Loc-N-Load™ Plate; (1) 6×12” Loc-N-Load™ Plate; (1) 12×12” Loc-N-Load™ Plate; (1) LNL-ANGL-0306, 6″ Angle Plate / Stop; (1) LNL-QUAL-PLT,  6 x 4″ Indicator Ball Plate; Plus TR-KIT-02, Inspection Arsenal® 70 piece Complete-Kit

Complete Kit includes: (4 ea.) Cross-Bow™ and D-Block clamps; (2 ea.) Trigger-Block™ clamps and V-Block stand-offs; (2) Trigger-Finger™ hold-downs with (4) 3” steel shafts, (4 ea. ) 1, 2, and 3” Silver-Bullet™ stand-offs, (2 ea.) -07 and -02 Simple-Stop™ rails and stops; (2 ea.) sturdy lever clamps 1.5″, 2.5″ and 3.5″ (shafts included) plus hex key, thumb and button-head screws.

Write Your Own Review
You're reviewing:Inspection Arsenal, CMM Fixture System (30″ with Complete Clamp Kit), SYS20_DK30TR02
Your Rating

Still have a question? No worries. Ask here

Ask your qusetion